VW Transaxle Tools

Photo

Part #

Description

Application

LE 151 PRO-SERIES UNIVERSAL SHIFT FORK JIG  

Whether you are a hobbyist or professional, an accurate shift fork adjustment is a must. Some jigs on the market will only work on one model. The LE 151 'Pro Series' shift fork jig will work on Type 1, 2 and 3 transaxles. This precision CNC machined jig utilizes a full size plate, (same overall dimensions as the OE VW tool). This results in an extremely rigid and versatile tool, allowing quick and easy shift fork adjustments. In addition, it comes with an extra reverse shaft to fit 091 reverse gears.  For trannys with late style pinion bearing, the kit comes with 106.6 mm long pins.  For trannys using the early style pinion bearing, you get the 116 mm long pins as well.  Also included is the spacer sleeve necessary to work on transmissions with the early style pinion bearing. We have sold hundreds of these precision jigs and know you will be satisfied with the quality.  $399.95
LE 152 START UP TOOL KIT Includes economy shift fork jig, leverage tool, M/S seal installation tool, and pinion nut tool (fits spanner & notched style nut that sits on top of the 1st gear race). Also, you can substitute our LE 151 'Pro Series' shift fork jig in place of the economy
jig if you wish. (Call for price) 
LE 152A  SHIFT FORK JIG Economy shift fork jig, urethane
  LE 153 BACKLASH TOOL backlash, swingaxle (currently not available)
LE 155 BACKLASH TOOL backlash, Type 2 IRS to 1975
  LE 156 TOOL VW 681 seal remover
LE 157 TOOL VW 381/14 pinion nut socket removes large round nut
LE 158 TOOL VW 381/15 differential socket, IRS Type 2
  LE 167 BEARING SPREADER (#402-1) bearing spreader general press operations
LE 169 HOLDING FIXTURE #2052 holding fixture, 76-on pinion nuts thru 1975
  LE 170 DIAL INDICATOR dial indicator 
  LE 171 ECONOMY VW 293 PINION NUT TOOL  use w/ notched & spanner pinion nut, on top of 1st gear needle bearing through 1975
LE 180

SWINGAXLE TYPE 1 VW TRANSAXLE  REBUILDERS COURSE CD

VW Transaxle Rebuilders Course CD, Swing Axle Type 1. Note: If you want to work on any of the 002 Type 2 (68-75) transaxles, you will need both the # LE 180 "Swingaxle Type 1 VW Transaxle Rebuilders Course CD" and the # LE 181 "091 Performance VW Transaxle Rebuilders Course CD".  The reason for this is the gear train covered in the # LE 180 "Swingaxle Type 1 VW Transaxle Rebuilders Course CD" is virtually identical to those found in  002 Type 2 (3 & 5 rib) transaxles. See "Rebuilders Course" page.
  LE 181

091 PERFORMANCE VW TRANSAXLE REBUILDERS COURSE CD

Performance VW Transaxle Rebuilders Course CD, 091 Type 2.  Note: If you want to work on any of the 002 Type 2 (68-75) transaxles, you will need both the # LE 180 "Swingaxle Type 1 VW Transaxle Rebuilders Course CD" and the # LE 181 "091 Performance VW Transaxle Rebuilders Course CD".  The reason for this is the gear train covered in the # LE 180 "Swingaxle Type 1 VW Transaxle Rebuilders Course CD" is virtually identical to those found in  002 Type 2 (3 & 5 rib) transaxles. See "Rebuilders Course" page.
 

TOOL VW 297 

SWING AXLE DIFFERENTIAL TOOL

 

This original factory VW 297 Peiseler tool set makes working on all swing axle differentials a dream.  The required preload and backlash can be quickly and accurately set. You'll be amazed at the improvement in performance and ring and pinion wear that a properly set-up diff will give you.  The large crank also makes removing and installing side covers a snap.  This is the same tool shown in our "VW Transaxle Rebuilders Course CD". (Not always available)
 

TOOL VW 385

UNIVERSAL PINION DEPTH MANDREL

With the Peiseler 385 universal pinion depth mandrel and the right accessories, you will be able to set the pinion depth on any VW transaxle.  This nifty tool transfers precise measurements through 90 degrees to a dial indicator that is located out on the end. It can also remotely adjust the position of differential cups. A very cool tool. (Not always available)

   

TOOL VW 380

FULLY AUTOMATIC DIFFERENTIAL TOOL

 

The Peiseler VW 380 is the factory tool for fully automatic differential pinion depth and backlash setup.  Application includes Type 3, Type 4 and early bay window bus.   Kit includes 5 tools.  In original factory box.
* Check out our specials page for additional tools *
      Many tools are available but not yet listed.  We also buy and sell used tools.  Please call for price and availability.
Let us know if you have any VW transmission tools you would like to sell.
Many new items to be added to this page...come back soon!

Home ] Specials ] Rebuilders Courses ] High Performance Parts ] Vanagon Syncro Specialty Items ] Parts List Info ] Parts List ] [ VW Transaxle Tools ] Rebuild Kits ] Remachined Sliders ] Technical Stuff ] VW Transmission Diagrams List ] Contact Us ] Volkswagen Links ]   Please place orders by phone at  707 829-1169